Embedding Cassettes and Storage
Electron Microscopy Sciences Gilder Hexagonal 300 mesh Copper Grid
A reliable support specimen grid source. Features: well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected. The copper grids with palladium plating offers better grid strength and avoids tarnishing. 3.05 mm diameter, 0.7 mil (18um) thickness.
Grid: Copper
Pitch: 83 µm
Hole: 58 µm
Bar: 25 µm
MSE Supplies LLC 2 IN SAPPHIRE WAFER R-PLANE (1
2 in Sapphire Wafer R-Plane (1-102) Single Crystal Al2O3 single side polished
Electron Microscopy Sciences Flat Embedding Mold Flat Embed Mold Single End, 4 mm deep, 14 x 5 mm
A clear silicone rubber with very high tear strength. It can be reused more times than the conventional silicone molds. It is resistant to most epoxy resins and its clear base allows positioning of the specimen lighted from beneath. Standard flat embedding mold.
Depth: 4 mm
Size: 14 x 5 mm
Cavities: 21
Electron Microscopy Sciences PTFE Embedding Mold
The PTFE Flat Embedding Mold offers flat embedding for most resins, including LR White, LR Gold, JB-4, Immuno-Bed and Lowicryl and can be used for both UV/low temperature and thermal cure. It may be used as a substitution for the silicone molds. The individual cavities are pre shaped to reduce block trimming.
For curing anaerobic material, we recommend using Aclar film, cut-to-size of the mold and lower on top of the mold after you ʽjust over-fill' the cavities with embedding resin. Due to the flexibility of the PTFE, you just bend the mold to pop out the cured resin blocks. After all the cast blocks have been removed, reinsert the mold to its holder to re-shape the mold.
The mold holder is machined from aluminum and anodized black. Each of the 18 cavities measures 5 mm W x 14 mmL x 4 mm deep. Overall mold measures: 5 1/2" x 3" x 1/4” (140x50x8 mm).
Electron Microscopy Sciences Gel-Pak Transparent Hinged Box, 1" x 1" x ¼"
Gel-Box AD Series Carriers owe their unique device-holding capabilities to a proprietary GEL coating applied directly to the bottom of a hinged box. Devices are held once contact is made with the GEL surface and will stay in place, even if the carrier is tilted or jarred. The carriers are designed for manual off-loading with tweezers or by hand. GEL-PAK AD series are ideal for handling devices where no direct contact with the top of the device is important.
The GEL-BOX Carriers may also be used for bare die handling, such as GaAs, PETs, laser diodes, and beam-lead devices where the die size is small (less than 1 mm) and tweezers or other specialized techniques are used for off-handling.
We offer standard retention level X4.
Dimensions: 1" x 1" x ¼"
Electron Microscopy Sciences Histo-Container Semiclear, 40 ml, 40 mm height, 42 mm I.D.
For the storage and transport of histology specimens, these containers are made from durable polypropylene and have leak proof seal caps.
Capacity: 40 ml
Height: 40 mm
I.D.: 42 mm
Electron Microscopy Sciences Transparent Wafer Container Single, 2.5", Polypropylene Material, 75 x 11 mm
The carriers are used for storage and or shipping wafers. They prevent all types of damage and contamination to the wafer during shipping and even storage. Each of the containers are packed in 1000 class clean room and bag. The set includes the Container , the cover and the spring. Boxes are transparent and made from Anti-Electrostatic Polycarbonate.
Use: 2½" (63 mm)
Material: Polypropylene
Dimensions: 75 x 11 mm
Electron Microscopy Sciences Press-To-Seal Red Silicone Sheet, 2.5 mm thick
Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Silicone isolators allow researchers to isolate specimens using removable hydrophobic barriers. They may be used to isolate cells grown in culture dishes or separate multiple specimens affixed to microscope slides. Without Adhesive.
Thickness: 2.5 mm
Enterprise Technology Solutions S.C. JOHNSON & SON, INC Storage Bags,Stand-Up Bottom,Quart,48/BX
Storage bags feature a bottom that stands up and stays open for easy filling. They'll help you out in the kitchen when you need an extra pair of hands. Wide bottom helps the bag stand up and stay open to easily fill. Grip 'n Seal technology and extended tab make it easier to open and close. Quart-size plastic bags are microwave-safe and BPA-free.
Electron Microscopy Sciences Well Bars Set 101
We offer Well Bar Sets to make your ordering easier and to offer you a complete set for facilitate your work. Two sizes well bars; Six small chucks; Four large chucks; Four Over-Chuck Freezing Blocks; One Chuck Bin; 16 Dispensing Slides; Cutting Board/Freezing Girdle; 1 Elevated Freezing Block; 1 Angle Embedding Forceps; and accessories.
Electron Microscopy Sciences Wafer-Mount™ 559
Available in sheet form 10"x10" (254x254 mm). To use, remove the paper backing exposing the adhesive layer. The substrate is positioned on the film and pressed down firmly so that it adheres to the plastic film. No heating is required. The wafer mounted on the plastic film can then be held down using a vacuum manifold or mechanical means for dicing or scribing. After dicing or scribing, the parts can be separated from the wafer-mount 559 film by washing in acetone or MEK. Ideal for holding down silicon wafers, alumina, or glass substrates for scribing.
Electron Microscopy Sciences Gel-Pak Conductive Hinged Box with Anti-Static Top, 2" x 2" x ¼"
Gel-Box AD Series Carriers owe their unique device-holding capabilities to a proprietary GEL coating applied directly to the bottom of a hinged box. Devices are held once contact is made with the GEL surface and will stay in place, even if the carrier is tilted or jarred. The carriers are designed for manual off-loading with tweezers or by hand. GEL-PAK AD series are ideal for handling devices where no direct contact with the top of the device is important.
The GEL-BOX Carriers may also be used for bare die handling, such as GaAs, PETs, laser diodes, and beam-lead devices where the die size is small (less than 1 mm) and tweezers or other specialized techniques are used for off-handling.
We offer standard retention level X4.
Dimensions: 2" x 2" x ¼"
Electron Microscopy Sciences BEEM Capsule Holder, Size 00
These holders are used to hold capsules upright during the resin embedding stage. The cavities (22) allow for illumination from the bottom of the holder for specimen orientation. Holds size "00", conical, and bottle neck capsules.
Size: Size 00
Electron Microscopy Sciences Porta-Wand Kit for up to 12" (300mm) wafers, ESD-safe flat wafer tip and 115V In-stand Charger
The Porta-Wand wafer handling toolkit comes with a non-removable 9.6V NiMH rechargeable battery and in-stand charger. Easy push-button on/off control. Replaceable internal air filter is accessible from the front of the tool. Internal exhaust filter ensures better than Class 1 performance. Indicator Light flashes when battery needs to be recharged, and also turn on when proper vacuum has been established. Comes with 115V in-stand charger.
Includes: ESD-safe flat wafer tip and 115V In-stand Charger
Psl Equipment Inc BLACK BIOPSY PAPER 500/PK
Non-absorbent porous mesh, specifically designed for processing biopsy specimens. Allows fluid to flow through freely while containing small tissue fragments.